Brands

CLADIATOR®

Advanced Cladding Support Systems

CLADIATOR is a manufacturer of smart, quality engineered cladding support systems that provide architects with maximum design flexibility and contractors with safe, quick and accurate installation methods for multiple applications.

  • Adjustable clip & rail systems with coplanar flush-mounting multi-point panel attachment.
  • Fiberglass Z-girts with optional insulation securement.
  • High thermal performance.

CL 300

Thermally Isolated Adjustable Cladding Support System

This robust cladding support system can bear the weight of any cladding material and is quick and easy to install. Polyamide clips are integrated with lightweight aluminum to provide both strength and over 90% thermal efficiency to the wall system. The CL 300 has the unique ability to offer deep adjustments and plum/leveling on the outer elevation vs shims at the waterproofing layer. Independent Flush-mounts are optional and integrate vertical and horizontal components which alleviates issues affixing panel edges where structural support alignment rarely matches the panel design.

SLOTTED-Z® FG

Integrated Fiberglass z-girt with Insulation Securement

Advancing how cladding support systems integrate with installing insulation. The SLOTTED-Z has two rows of slotted holes every three inches to enable the ROCKETStick with it’s simple peg in slot design to secure semi-rigid or rigid board insulation in place.  This concept not only faster and easier than current methods, it also prevents penetrations and disruptions at the waterproofing layer.

  • Advanced in thermal performance
  • Fiberglass has a low thermal conductivity so temperatures outside the building are not easily transferred to the interior.

Rocket-Stick®

Secure Insulation in One Shot

FAST, EASY, SECURE

  • Integrates with all SLOTTED-Z® cladding attachment systems
  • Quick and easy
  • Secures insulation away from the waterproofing layer and does not puncture the insulation
  • No power tools required
  • Optional Component

ROCKETSTICK (PEG & SLOT)

Visit us at CLADIATOR.com for technical data and more information on this product line

ESTOLGA®

Cladding Attachment Systems

ESTOLGA® 3000 RS

Reverse-Lock Rainscreen Attachment System

  • Specifically designed for rain screen applications.
  • No rivet or screws on the edge of securement.
  • Allow expansion and contraction.
  • Reverse-Lock configuration secures ACM panels in place.
  • INTERTEK Tested to AAMA 508; AAMA 501.1;
    ASTM E283/E331/E330/ E1233/NFPA 285 pass.
  • Quick & Easy to Install.
  • Cost effective.

ESTOLGA® 3000 RLDS

Reverse-Lock Dry Seal Attachment System

  • Reverse-Lock configuration secures ACM panels in place.
  • No rivet or screws on the edge securement.
  • Allow expansion and contraction.
  • Dry Seal gasket fits snuggly between panel joints.
  • INTERTEK Tested to: ASTM E283/E331/E330.
  • Quick & Easy to Install.
  • Cost effective.

ESTOLGA® 1000 CLWS

Clip-Lock Wet Seal Attachment System

  • Clip-Lock configuration secures ACM panels in place.
  • No rivet or screws on the edge securement.
  • Allow expansion and contraction.
  • Can be fabricated as a rectangle or round column 
  • INTERTEK Tested to ASTM E283/E331/E330
  • Quick & Easy to Install.
  • Cost effective.

ESTOLGA® 1000 CLDS

Clip-Lock Dry Seal Attachment System

  • Clip-Lock configuration secures ACM panels in place.
  • Dry Seal gasket fits snuggly between panel joints
  • Can be fabricated as a rectangle or round column 
  • INTERTEK Tested to: ASTM E283/E331/E330/AAMA 505.1
  • Quick & Easy to Install.
  • Cost effective.

ESTOLGA® 550 OSCF

On-Site Contractor Fabricated Attachment System

  • Fabricated on site.
  • ACM panel and attachment system is shipped with skid loader job site to eliminate fabrication production time.
  • Field dimension and fabrication on-site to speed up the progress.
  • INTERTEK Tested to: ASTM E283/E331/E330.
  • Rapid Install.

ESTOLGA® 200 CSL-PR

Closed-Seam Locked Attachment System for Pre-Routed ACM Panels

  • Standard size fabrication program.
  • Closed-Seam Finished Edge.
  • Flexible polyamide material allows ACM panels to easily lock into place.
  • Modular panel systems are standardized in 2 sizes, and can customize it to any of 2 sizes with possibility for further customization.
  • Butt to butt joint connection.
  • Products are packaged in boxes, and sent to the jobsite, ready to be installed.
  • Allow easy transportation.
  • Simple and easy to install.
  • INTERTEK Tested to: ASTM E283/E331/E330.